How to Make a Drawstring Backpack With Grommets | Best Guide in 2023

Are you looking for a fun and easy DIY project that can be completed in just a few hours? Look no further than how to make a drawstring backpack with grommets! These backpacks are perfect for carrying small items, whether you’re heading to the gym, going on a hike, or just needing a bag for your daily commute.

In this article, we’ll take you step-by-step how to make a drawstring backpack with grommets. We’ll cover everything from choosing the right materials to finishing touches that will make your backpack stand out. So grab your supplies and let’s get started!

Also Read: How to Build A Backpack Station | Best Guide

Materials Which Is Used in Drawstring Backpack

Before you can start making your drawstring backpack, you’ll need to gather your materials. Here’s what you’ll need:

• Fabric for the backpack (we recommend using a durable fabric like canvas).
• Fabric for the lining (optional).
• Grommets (we recommend using 1/2-inch grommets).
• Cord or ribbon for the drawstring.
• Sewing machine.
• Thread.
• Scissors.
• Ruler or measuring tape.
• Iron.
• Fabric chalk or marker.

Also Read: Are Military Boots Good for Backpacking | A Comprehensive Guide

Step 1: Cut your fabric

The first step in making your drawstring backpack is to cut your fabric to the correct size. You’ll need two pieces of fabric for the main body of the backpack, two pieces for the bottom, and two pieces for the straps. If you want to add a lining, you’ll also need to cut two pieces of fabric for the lining.

Here are the measurements we recommend using:

• Main body: 17 inches by 15 inches.
• Bottom: 17 inches by 4 inches.
• Straps: 4 inches by 28 inches.
• Lining (optional): 17 inches by 15 inches.

Use your ruler or measuring tape to measure and mark your fabric, then cut along the lines using your scissors.

Also Read: Best Soccer Backpack with a Ball Holder | Review

Step 2: Attach the grommets

Next, it’s time to attach the grommets to your fabric. Grommets are metal rings that reinforce holes in the fabric and prevent tearing. They also make it easy to thread your drawstring through the backpack.

You’ll need to follow the manufacturer’s instructions to attach the grommets. Typically, this involves punching a hole in your fabric using a grommet tool, inserting the grommet into the hole, and then using the tool to crimp the grommet in place.

We recommend using four grommets per backpack, placing two on each side of the bag. To determine the placement of your grommets, measure and mark the center point of each side of your fabric.

Also Read: 11 Best Backpacks for Gym and work

Step 3: Sew the backpack together

Now it’s time to start sewing your backpack together. Begin by placing the two main body pieces of fabric right sides together and sewing along the sides and bottom, leaving the top open.

Next, attach the bottom pieces of fabric to the main body pieces by sewing along the bottom edges. Repeat this step with the lining pieces, if you’re using a lining.

Once you’ve sewn your pieces together, turn your main body piece right side out and slip it into the lining piece. The right sides of the fabric should be facing each other. Sew around the top of the bag, leaving a small gap for turning.

Step 4: Create the straps

To create the straps for your backpack, fold each strap piece in half lengthwise and sew along the long edge, leaving the short ends open. Turn the straps right side out and press with an iron.

Step 5: Attach the straps

Finally, it’s time to attach the straps to your backpack. Fold each strap in half and place it on the back of the backpack, aligning the raw edges with the top of the bag. Sew the straps in place, making sure to reinforce the stitching by sewing over it a few times.

Thread your cord or ribbon through the grommets, starting at one side and going all the way around the bag. Tie the ends of the cord or ribbon together to secure it in place.

Step 6: Finish your backpack

Congratulations, you’ve just made your own drawstring backpack with grommets! But before you start using it, there are a few finishing touches you can add to make your backpack even more special.

Consider adding a pocket to the inside or outside of your backpack for extra storage. You could also add embellishments like patches, embroidery, or fabric paint to give your backpack some personality.

Also Read: 12 Best Backpacks for Students with Back Pain | Reviews

Conclusion

Making a drawstring backpack with grommets is a fun and easy DIY project that anyone can do. With just a few materials and some basic sewing skills, you can create a backpack that’s perfect for carrying your essentials. Whether you’re heading to the gym, going on a hike, or just need a bag for your daily commute, a drawstring backpack with grommets is a versatile and stylish option.

FAQs